Juniper Netscreen

From Hugme.org

Contents 1 Pin outs 2 Address Translation 3 Setup Options 3.1 Basics 3.2 SSH 3.3 Setting up your rules

Pin outs

• 5GT
• 25

Address Translation

Setup Options

• Default password
  • login: netscreen
  • password: netscreen

Basics

• show interfaces
  • get int
• Change your login credentials
  • set admin name [user]
  • set admin password [password]
  • set user netscreen password
• Set an IP address on eth1
  • set int eth1 ip 192.168.1.2/24

SSH

set ssh enable

Setting up your rules

1. Set up your address

• • set add trust 192.168.1 192.168.1.0/24

1. Set up a group

• • set group add trust home add 192.168.1

1. Set up a policy

• • set pol from trust to untrust home any any nat permit